Kesser K-EKMH-2022 Manual De Instrucciones página 28

Idiomas disponibles
  • ES

Idiomas disponibles

28
2. Press the button
. When you press the button for the first time, charcoal and flame glow
in the highest brightness level. Press the button for the second time to set the charcoal and
flame to medium brightness. Press the button for the third time, the charcoal and flame are
on low brightness. Press for the fourth time, the coal and the flame go out. Then it circulates
one after the other.
Remote control and LCD display
Remote control Tx data code format
1. Press the button of the remote control "
", its screen turns on, the flame ignites and the
flame icon appears on the LCD screen of the remote control. Week, time (24h system) and
temperature setting are displayed normally. Press the button again, the screen of the remote
control turns off:
2. Button"
", flame and charcoal control switch. In the case of ON, press once, the flame
and the charcoal bed go out, on the LCD screen is not displayed
. Press it again and the
flame and charcoal bed will turn on, on the LCD screen will be display
, on the device
the buzzer will beep once when the button is pressed:
3. Press the red "
"
to set the red flame. on the device, the buzzer beeps once
when
the button
is pressed:
www.eshopping.de
Hergestellt für Dilaw Warehouse GmbH // Fuggerstraße 15a // 48165 Münster // Germany
loading