Kesser K-EKMH-2022 Manual De Instrucciones página 26

Idiomas disponibles
  • ES

Idiomas disponibles

26
«□)) and the device lights up blue). - press again for one second,
to switch off the heating again (in the display expires «□)) and on the device). - Note: The
heating elements only heat when the room temperature
is lower than the set temperature.
CAUTION! The device is hot during and still of use = > not touch! ATTENTION! Do not cover the
device or use it to dry
Use cloths, clothes, etc. Fire! - Good to know: It is normal for the device to produce a smell
and light smoke even longer breaks or when new. However, these disappear for a short
period of operation. Set Temperature - Direct remote control to device.
With the tosts, the desired room temperature can be set in the range of 7-30 °C (when
pressing the toasts, a beep sounds).
Set Clock - Point remote control at device. - Toste>> press (the hour indicator will start
flashing). Set with the TostenStunde. Toste» (the minute indicator starts flashing). Set minute
with the dead. - Toste>> press (the weekly tog number starts flashing). Set with the
tostenWeekday (e.g. l for Monday or 7 for Sunday). Set timer operation With the timer
function, the heating can be automatically switched on/off in hourly increments.
The on/off switches can be set individually for each day of the week, so you can, for
example, heat longer on weekends than during the week. - Direct remote control to device. -
If the device is not yet switched on, turn it on by pressing the button (on the remote control). -
-Press the button on the remote control (the temperature indicator will start flashing, e.g. 24
°C). - With the buttons
Set the desired temperature, e.g. 21 °C (possible temperature setting range: 7-30 °C}. -
Button>> press. (l] and «OO» start flashing. You can now make the settings for Monday (= l).
In later steps, the other days of the week, e.g. Wednesday (= 3), can also be set. - The settings
are displayed on the bar display. There are 24 small beam elements per row, i.e. one for each
hour. So is the far left of a bar for 00.00 to 01.00 o'clock or far right for 23.00-00.00 o'clock. With
the following settings, the bars and thus the heating are switched on or off. - Button».
In the display appear: - □□ for heating - 00 (for 00:00 to 00:59) - Heating on from 00:00 to 00:59
- Button>> press again to the
Reduce heating power. In the bar display, only the lower bar button lights up>> press again
to change the heating from 00:00 to 00:59
Off. □□ and the two left bars in the display go out.
In this way, the settings can be changed for each bar (= every hour) by repeatedly pressing »
- With the button you can move on to the next bar, in the display light up 01 for 01:00-01:59.
With button>> you can change the settings as described above for each hour.
With the button you can scroll back to the previous hour settings (= previous bars) at any
time.
After all settings have been made, activate them by pressing the C9 button. The timer symbol
C9 and the selected times appear in the display in the form of bars, e.g. The device turns on
at the desired times with the desired power (2 bars for full and l bars for half power and no
bar for off).
By pressing the C9 button again, the timer can be switched off.
Window-Set to Function
This function detects larger temperature drops,
such as
those that can occur when
the window is open. When active, the device measures the temperature in the room
every 12 minutes. If the temperature drops
by
more than 4 °C within 30 minutes
,
the
heating process is switched off to prevent energy waste
.
Turn on function: Press button on remote
control.
On the remote control indicator
appears and on the back of the device the indicator lights up yellow. - Turn off
function: Press the button on remote control again (the indicators go off).
If the temperature drops by more than 4
°C
when the function is switched on, the
heating switches on for 70
minutes.
(the indicator on the device flashes quickly).
www.eshopping.de
Hergestellt für Dilaw Warehouse GmbH // Fuggerstraße 15a // 48165 Münster // Germany
loading