Idiomas disponibles
Idiomas disponibles
After 70
min.
the device turns on the heating every 30 minutes for 6 minutes. If the
temperature rises by 2
the indicator no longer
Overheating protection
If the device overheats, it switches off
off the power button and unplug it. CAUTION: the device is hot! - ATTENTION! Check
whether covered lutein/leak openings are the cause of the
openings must never be covered/ covered. Fire! Let the device cool down
completely. Then plug in the power plug and turn on the power switch.
Turn on the heating and supervise the device. If it overheats again, it must no longer
be
used and must be controlled by the service.
9. Cleaning/storage
Before cleaning, turn off the device and unplug it. Allow the device to cool
completely (at least 15
dry.
Remove lint on the device, e.g. with brush or vacuum cleaner nozzle (with soft brush
attachment).
ATTENTION! Do not use abrasive cleaning/auxiliaries! WARNING! Do not
open the device and do not insert any objects into the device.
Do not immerse in or associate with water or
When not in use, always unplug.
Turn on the
main switch
on
,
then the device is in standby state.
Manual operation
1. Press the button
lights up red. Press for the second time, the heater works with 950 W, the indicator
blue. Press for the third time, the heating element turns off, the display goes out.
Note: After manually switching on the heating elements, the heating elements work but are
not controlled by the temperature sensor.
Hergestellt für Dilaw Warehouse GmbH // Fuggerstraße 15a // 48165 Münster // Germany
27
°C,
the device assumes that the window is closed again and
flashes.
automatically.
min.
). Wipe the case with a slightly damp cloth and then rub
Remote Control Function Description
, the buzzer beeps once to indicate that the device is turning
. Press for the first time, the heater works with 1900 W, the indicator
www.eshopping.de
In this case, immediately turn
disturbance.
other liquids.
Danger of electric shock!
The
lights up
