Idiomas disponibles
Idiomas disponibles
ATTENTION! The weather station provides regular transmission of current readings to the WeatherUnderground (https://www.wunderground.com)
and Weathercloud (https://weathercloud.net) servers, with a stable Internet connection and the appropriate settings. To use this
function, you must register the weather station on the aforementioned sites by creating a personal account (free) and receiving a weather
station ID and access key. Both weather servers allow you to receive current weather data from your weather station in real time and view
historical data from any part of the world via the Internet.
• Press and hold the BARO/—/
mode (AP) and is ready to SET up Wi-Fi connection.
• Use your smartphone, tablet, or computer to complete the following steps:
— Open the Wi-Fi settings on your PC or Android/iOS device. To do so, go to settings and select Wi-Fi settings.
— Locate the weather station SSID from the list. It should appear as WWS-XXXXXX (where all the X's are integers) in the list. Tap on the SSID to
connect.
— Once you are connected to the weather station, open up your internet or mobile web browser, and enter the following address into the address
bar: http://192.168.1.1 to access the weather station web interface. (Make sure to include the http://or else the web browser may interpret the
address as a search query.)
— In the web-interface, fill out the required information in the SETUP tab. Make sure all information is entered correctly before saving. If you do
not plan to use Wunderground.com and/or Weathercloud.net, remove the corresponding checks.
Weather station web-interface (SETUP tab)
ATTENTION! To automatically synchronize the time in your time zone, change the time zone setting in the TimeZoneSetup section of the SETUP
tab. The default is "+0:00". You must specify your time zone. If daylight saving time is in effect for your country, activate the corresponding
checkbox.
— Press APPLY to save the information filled in this tab.
ATTENTION! The ADVANCED tab contains options for calibrating sensors, but this requires specialized knowledge. In daily operation of the
weather station, it is not recommended to independently calibrate most sensors, with the exception of relative pressure indicators, which
strongly depend on altitude above sea level.
• To finish setup press and hold the BARO/—/
connect to your Wi-Fi network with all your changes saved.
• Wi-Fi connection status is displayed on the LCD screen. Flashing
Missing
icon means the weather station is not connected to a Wi-Fi router. Constantly on
Weather station basic setup
• Press and hold the SET button, to begin configuration. Beep ON will blink on the LCD screen.
• Press WIND/+ or BARO/—/
• Press SET to confirm and move on to the next setting.
Basic settings order: Sound signal on/off > NTP server on/off > Language > Time zone > Daylight saving time (DST) on/off > Date format > Year >
Month > Date > 12/24 hours > Time (hours) > Time (minutes) > Temperature Units > Pressure Units > Relative Pressure Calibration > Precipitation Units >
Wind Speed Units > Hemisphere > End Setup (Return to Normal Mode).
ATTENTION! 8 languages are available for displaying the day of the week: ENG (English), GER (German), FRE (French), SPA (Spanish), ITA
(Italian), DAN (Danish), DUT (Dutch), RUS (Russian).
After 20 seconds of inactivity, the setting mode will automatically switch to normal mode. To exit settings press the
button for 3 seconds. The station's LCD screen will show the AP icon to signify it has entered the Access Point
UI language select
Select from a list of available Wi-Fi networks (SSID)
Your Wi-Fi network password
WeatherUnderground server station ID
WeatherUnderground server station key/password
WeatherUnderground upload confirmation
Weathercloud server station ID
Weathercloud server station key/password
Weathercloud upload confirmation
Time zone selection
Time sync server selection
APPLY button
button on the weather station for 3 seconds. The station will exit the Access Point (AP) mode and
to turn button sound on or off.
icon means unstable Wi-Fi signal or active attempts to connect to the router.
icon means stable connection to your network.
9
(Backlight/Snooze) button.
