A.
Freezer temperature adjustment sensor
This button is used to adjust the temperature within the freezer. Press this sensor once to activate
adjustment, and then as many times as necessary until the desired level is selected. The settings
range from 1 to 6 with 1 being the warmest and super freeze being the coldest.
Please note: Where possible, avoid having the temperature setting on 5 or super freeze (snowflake)
all of the time. This will help to alleviate strain on the compressor and system.
B.
Freezer temperature setting display
This display will illuminate the current temperature setting. Adjusting the temperature will cycle
through this display.
Please note: You do not use numbers 1 to
5 or the snowflake to change the
temperature. Instead, use the freezer
temperature adjustment sensor (A).
C.
Power button
Press the sensor once to rose up the
function, and then press for 3 seconds to switch the appliance on or off .
This product has power-off or power failure memory function.
Care and cleaning
Always disconnect the appliance from the power supply before any cleaning or maintenance.
The drawer sections should be cleaned using a solution of bicarbonate of soda and lukewarm water.
Do not use abrasive products or detergents. After washing, rinse and dry thoroughly.
Clean the compartments separately by hand with a mild solution of washing up liquid and water.
Do not use abrasive cleaners or detergents.
If the appliance is not to be used for prolonged periods of time, unplug and clean the appliance.
The doors should be left slightly ajar to prevent the formation of mildew and unpleasant odors.
Defrosting the freezer
The freezer has a no frost system which is designed to prevent the heavy build up of ice. Under
normal use, there should be no need to regularly defrost the freezer system.
Please note: If you are regularly finding a heavy build up of ice, or pools of water, in the freezer
section then it is likely that the door is not sealing properly. This could be due to a defective door
13
