Idiomas disponibles
Idiomas disponibles
EN
Maintenance
General maintenance
▶ Clean the tap only with Franke tap cleaner.
Visit our Franke webshop.
▶ Do not use cleaning agents containing
a solvent or acid, such as lime scale
removers, household vinegar or cleaning
agents with acetic acid. These substances
damage the surface. The tap will become
matt and scratched.
▶ Lime scale deposits can be prevented by
drying the tap after use.
▶ If lime scale deposits nevertheless occur,
remove these using a citric acid-based
cleaning agent.
▶ Always use original Franke parts for
maintenance or repair. This guarantees the
safety and proper function of the product and
safeguards any warranty claims.
▶ Replacement or repair of parts may only be
carried out by Franke Service.
Replacing the filter
▶ Turn filter clock wise to remove from filter head.
▶ Turn new filter anti clock wise to install. Reset the
filter setting - see page 16 in the "Installation
and user manual" part 2/2 (filter installation).
▶ The filter head has an integrated auto shut off
water valve. No need to isolate water supply
to change filter.
Descaling tap aerator
▶ Always use a citric acid-based descaling
agent. Other substances will damage the
material!
▶ Loosening and tightening can be made easier
by wrapping an elastic band around the
sleeve of the tap aerator. Take care that the
sleeve of the tap aerator is not damaged
by the use of tools.
▶ Over the course of time, lime scale deposits
will appear on and alongside the tap aerator.
▶ Unscrew the sleeve of the tap aerarator.
▶ Clean the tap aerator using a suitable
descaling agent.
▶ Place the tap aerator into the sleeve.
▶ Place the gasket onto the tap aerator and
screw on the sleeve finger-tight.
Check the details in the "Installation and user
manual" part 2/2, page 15.
16
