Idiomas disponibles
Idiomas disponibles
EN
▶ Hold the object to be filled close to the tap
so that the object surrounds the delivery
opening of the tap. This will prevent (hot)
water from splashing.
▶ For the optimum result when making coffee
or tea, allow around 1 cup of water to run out
before using the tap. In this way the air
bubbles in the water disappear so that no
foam forms on the surface of the tea.
Filter operation and replacement
1. Press and hold the electronic knob (in the
neutral positioning) for 10 seconds.
2. Turn the electronic knob backwards to
select the correct colour from the table on
next page, based on the water hardness in
your area. Press and hold the electronic
knob for
2 seconds. The LED flash 3 times for
confirmation and go back in to the neutral
position.
The LED in the neutral position reminds you
1 month in advance that the filter needs to be
replaced. The LED in the neutral mode switch
from white to orange.
If the filter reached the expire date the orange
LED starts to pulsate until the filter has been
replaced.
Slowly turn the used filter from the filterhead.
During this process, the water supply line is
hydraulically disconnected from the filter head
and the system is depressurised; it may happen
that pressure peaks, a small amount of pressure-
relief water may escape from the filter head.
Please note this and place an appropriate
container underneath.
After the filter replacement, repeat step 1 and 2.
If you registered your system you will get a
reminder via email.
The use of a Franke filter is mandatory to
protect the product against lime scale deposits.
It is mandatory to change the filter based on the
water hardness table.
Filling mode
▶ Press 2x briefly for Pan filling.
Pan filling: Boiling water (red) = 30 sec. flow
▶ Press 3x briefly for Pan filling.
Pan filling: Boiling water (red) = 60 sec. flow
Water hardness
<10°dh
10-15°dh
15-20°dh
>20°dh
Filter flushing
After 1 week stagnation
After 2 weeks stagnation
After 8 weeks stagnation
Water hardness
<10°dH*
10-15°dH
15-20°dH
>20°dH
* default setting
12
LED colour
light blue
yellow
light green
purple
2 litres
10 litres
The filter must be
replaced.
Filter lifetime
12 months
10 months
8 months
6 months
