Hisense IMC2000A Manual De Instrucciones página 35

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 109
Using the appliance
Open the lid and take out the basket. Add water to the reservoir. Note: There is a maximum level,
1.
"MAX", in the reservoir. The water should not exceed the MAX position. If the water exceeds this
level, you will need to open the bottom drain plug,
Plug in the power and press the Start/Stop button to start the machine.
2.
Select the size of the ice you want to make, with large ice set as the default.
3.
Cleaning
Clean the inner liner, ice collecting tray, water box, ice shovel and evaporator frequently. When
1.
cleaning, unplug the unit and remove the ice cubes. Use a diluted solution of water and vinegar to
clean the inside and outside surfaces of the ice maker. Do not spray the ice maker with chemicals
or diluted agents such as acids, gasoline or oil. Rinse thoroughly before starting.
Keep ventilation openings in the enclosure of the appliance or in the built-in structure clear of
2.
obstruction. Do not use mechanical devices or alternative means to accelerate the defrosting
process, besides those recommended by the manufacturer.
If you are reusing the machine after it has been idle for a period of time, it may not have enough
3.
water to pump for air retard; in this case, the water shortage indicator "Add water" will be on.
Repress the Start/Stop button to restart the ice maker.
To ensure the cleanliness of ice, change the water in the water reservoir at least once per day. If
4.
the appliance is not used for a long time, drain the water out and clean the appliance.
If the compressor stops working due to a water shortage, water overfilling or interruption of power
5.
supply, it will take 3 mins to start up after being restarted.
Always use fresh water before starting ice production, whether it be during the initial installation or
6.
after a long shut-off period.
According to the actual use of the machine, the filter screen in the water tank shall be regularly
7.
cleaned after disassembly to prevent the water inlet from being blocked by incrustation or scale,
as shown in the figure below. Take out the ice collecting tray and filter cover from the water tank in
turn; clean the filter cover with clean water using a brush, and then put it back in place.
Filter cover
34
Ice basket
loading