Idiomas disponibles
Idiomas disponibles
Control panel instructions
Ice making progress
Cleaning
Large/small ice
Plug in the power supply. The machine will start the de-icing function first. After no operation, the
1.
machine will automatically enter standby mode.
: Cleaning function. Press the CLEAN button, and then press the Start / Stop button. The
2.
machine will automatically enter the cleaning function for about 2.5 minutes. Please do not turn
off the power during cleaning. After cleaning, the machine will automatically enter standby mode.
: Select the ice size mode; the default mode at startup is large ice. The icon is displayed for
3.
the selected mode.
Start/Stop: After the power is plugged in, press the Start / Stop button, and the machine will
4.
start the ice making function. The default mode is large ice making mode.
Time display: after the machine starts to make ice, the time count begins. The calculation time
5.
starts in minutes, and will be shown throughout the operation of the machine. Once the display
reaches 99:99, the time will be reset to zero again, and so on.
Water shortage alarm: during pumping, if no water flow is sensed within 5 seconds, the water
6.
shortage icon will be displayed, and the machine will stop working.
Ice full: When the compressor of the machine is not working and the infrared indicator is blocked
7.
for more than 5 seconds, the ice full icon will be displayed. At the same time, the machine will
stop working and the ice full icon will flash in 1 / 4 seconds. Infrared detection continues; when
the detection is no longer blocked, the machine will continue to work.
Start/Stop button
Size selection
Clean button
33
Ice prep time
Add water
Ice full
