Idiomas disponibles
Idiomas disponibles
Overheating protection
This appliance is featured with an overheat protection. Should the temperature exceed safe levels the
appliance will automatically cut off power.
The thermal Cut-out switch is located on the rear of the appliance. To reset the appliance after a sufficient
cool-down period:
1. Unscrew the reset switch cover.
2. Press the small reset switch down until it clicks, using a blunt pointed instrument.
3. The appliance is now reset and can be used as normal.
Cleaning, Care & Maintenance
Warning:
Always turn off and disconnect the appliance from the power supply before cleaning.
Always allow the appliance to cool before cleaning.
If grease is permitted to accumulate, it will begin to carbonised into a hard substance that is extremely
difficult to remove. To prevent this follow the cleaning steps below:
•
Regularly remove excess grease or fat using a cloth dampened with warm soapy water.
•
Take care when using scrapers to remove cooking residues as they can damage the cooking surface.
•
Dry thoroughly after cleaning.
For best performance, BUFFALO recommend that the appliance is cleaned after each day of
operation.
Failure to clean the appliance regularly may result in premature activation of the thermal
cut-out switch.
Scraping
•
After each use, scrape the appliance with a soft plastic or wooden scraper to remove excess fat and
food.
•
If there is an accumulation of burned fat or food, the cooking surface should be thoroughly scoured.
Caution:
It is vital that the cooking surface is lightly oiled after scouring.
Do not use steel wool as it may leave shards that could contaminate food.
Waste Tray
•
This appliance is featured with a waste tray to collect any liquid or fats that run off during cooking.
•
At least once a day, remove and empty the waste tray before washing with warm soapy water. Do not
allow the tray to overfill.
Warning: DO NOT remove the tray during or immediately after use as the contents are still
hot.
CU600 to CU606_ML_A5_v1_20240207.indb 5
EN
5
2024/2/7 14:34:06
