1. Manuales
  2. Marcas
  3. cecotec Manuales
  4. Ventiladores
  5. EnergySilence Aero 3600 Invisible Natural...
  6. Manual de instrucciones

cecotec Energysilence Aero 3600 Vision Full Black Manual De Instrucciones página 36

Ocultar thumbs Ver también para Energysilence Aero 3600 Vision Full Black:
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 26
ENGLISH
Warning
Self-tapping screws are only suitable for wooden ceilings. In case of installing the ceiling fan
to concrete ceilings or joists, use a drill for making the holes and plugs or expansion screws
(not included).
8. Remove the screws located on the lower part of the motor through the lamp support.
9. Screw the blade brackets to the motor through the hole in the lamp support paying
attention to the warning sticker located on one of the blade brackets. Fig. 4
10. Screw the blades to the blade brackets using the screws, washers, and nuts provided.
Because blades are reversible, choose the side you wish to be visible and screw them in
such way that the nuts are located on the top part of the blade. Fig. 5
11. Once the installation bracket is screwed, connect the wiring. First connect the quick-
connect cable to the terminal block on the installation bracket. Following the colour
code (Fig. 6). From the opposite end of the terminal block, connect the wiring from the
installation of your home.
Fig. 6 key:
1.
Black and Blue
2. White
3. Earth
4. Phase (Brown/Black)
5. Neutral (Blue)
6. Earth
12. Lift the pre-assembled fan assembly up to the installation bracket and pass the hanging
ball through the hole in the installation bracket. Fig.7
13. Connect the cables that come out from the downrod to those from the installation bracket
using both quick connectors.
14. Slide the canopy upwards so that all the connections are stored inside it and screw it to
the installation bracket using the 4 screws (2 to each side) removed at the beginning of the
installation process. Fig. 8
15. Tighten the bulb to the lamp holder (not included). Fig. 9
16. Place the lamp on the bottom of the appliance inserting the tabs of the lamp support into
the glass so that it is fully secured. Fig. 10
17. Attach the chain. To do so, fix the long chains with the corresponding end parts of the fan
chains by introducing the long chain end into the connecting piece. Fig. 11
18. Make sure that the chains are safely fixed by pulling on them carefully from the connecting
piece. Fig. 11
Warning
The important safety precautions and instructions stated in this manual are not meant to
36
ENERGYSILENCE AERO 3600 VISION FULL BLACK | WHITE | PINK | YELLOW | GREEN | BLUE
loading

Manuales relacionados para cecotec Energysilence Aero 3600 Vision Full Black

Productos relacionados para cecotec Energysilence Aero 3600 Vision Full Black

Este manual también es adecuado para:

Energysilence aero 3600 vision full whiteEnergysilence aero 3600 vision full pinkEnergysilence aero 3600 vision full yellowEnergysilence aero 3600 vision full greenEnergysilence aero 3600 vision full blue08453 ... Mostrar todo