Idiomas disponibles
Idiomas disponibles
EN
24. PRODUCT IDENTIFICATION
The FCXI fan coils can be identified through:
- PACKAGING LABEL
Located on the packaging, it indicates the product identification data.
- TECHNICAL PLATE
Located inside the unit, it indicates the identification and technical data
of the product.
packaging label
example of packaging label
25. INFORMATIONS
TRANSPORT
Refer to the weight indications on the
data plate to transport the unit safe-
ly.
Take the following measures during
transport:
The unit and the accessories must
•
not undergo violent impacts in or-
der not to affect the integrity of the
structure and of the internal compo-
nents;
The unit and the accessories must
•
be suitably secured onto the trans-
port surface with ropes or any other
means that prevent movement:
During transport, the unit and any
•
accessories must be protected to
prevent them from impacts;
During transport and storage, the
•
unit and the accessories must be al-
ways protected against bad weather.
22
CHECKS UPON RECEPTION
Visually check the unit upon reception
to make sure that:
the order corresponds with what
•
is indicated in the transport docu-
ments;
packaging is intact;
•
the unit and the panelling are intact;
•
all the components have been pro-
•
vided.
Indicate any damage or missing com-
ponents on the transport document.
HANDLING
ATTENTION!
Wear proper personal protective
equipment (PPE) during handling
operations.
Fully remove the unit and the compo-
nents from the packaging before in-
stallation and use.
INSTALLATION
ATTENTION:
removal, the lack of the
identification plate does
not allow the product to
be safely identified and will
complicate any installation
or maintenance operations.
technical plate
xxxxxxxxxx
Volt
example of technical plate
Comply with the installation instruc-
tions provided in the following par-
agraphs. The paragraphs follow a
chronological order to facilitate in-
stallation.
Retrieve the documents (manuals and
declarations of conformity) and the
components required to complete
installation from inside the unit.
Aermec accessories are supplied com-
plete with manuals for installation
and use.
Aermec accessories are designed to
blend with the unit Aermec, both the
functional aspect and on the security.
Our units are designed to mount inside
the accessories that Aermec addi-
tional heaters if fitted correctly they
have no influence on the surrounding
environment, technical spaces are
unchanged from the base unit.
FCXI_AS_U
Tampering,
IFCXIIJ 1501 - 5386400_00
Capítulos
