Idiomas disponibles
Idiomas disponibles
Cleaning and Maintenance
HOW TO CLEAN
CAUTION: Make sure that the motor base is
unplugged from the power source before inserting
or removing any attachment and before cleaning.
CAUTION: DO NOT immerse the motor base into
water or any other liquid.
1
Separate/remove all parts from each other.
2
Hand Washing: Wash containers, lids, and blades
assemblies in warm, soapy water. When washing
the Nutri Ninja
Blade Assembly, use a dish-washing
®
utensil with a handle to avoid direct hand contact with
blades. Handle the blades assemblies with care to avoid
contact with sharp edges. Rinse and air dry thoroughly.
Dishwasher: Containers, lids, and blades assemblies
are all dishwasher safe. The lids and blade assemblies
are top rack dishwasher safe. Ensure that the blade
assemblies are removed from the containers before
placing in the dishwasher.
WARNING: Handle the Nutri Ninja Blade Assembly with
care when washing, as the blades are sharp. Contact
with the blades' edges can result in laceration.
3
Wipe the motor base clean with a damp cloth.
If the appliance needs servicing, please call customer
service at 0800 862 0453.
30
HOW TO STORE
1
Store the Nutri Ninja Slim upright with the blade
assembly inside the corresponding container with the
lid secured on top. Do not place anything on top. Store
the rest of the attachments in a safe place where they
will not be damaged and won't cause harm. Loosely
wrap the power cord around the Power Pod.
NOTE: Do not store blended or unblended ingredients in the
Nutri Ninja cup with the Nutri Ninja blade assembly attached.
RESETTING THE MOTOR THERMOSTAT
The Nutri Ninja
Slim features a unique safety system
®
which prevents damage to the unit's motor and drive
system should it be inadvertently overloaded. If the
appliance is being overloaded, the motor will stop. To
reset the appliance, follow the resetting procedure below:
1
Unplug the appliance from the electrical outlet.
2
Remove the cup from the Power Pod, empty the
container and ensure that no food is jamming the blade
assembly.
3
Allow the appliance to cool for approximately 15 minutes.
4
Refill the cup, place the cup in the Power Pod, and re-plug
the appliance into the electrical outlet.
5
Proceed to use the appliance while making sure not to
exceed the recommended maximum capacities.
