Idiomas disponibles
Idiomas disponibles
4.
Turn the bottle upside down.
Align d on the bottle with u on the motor unit.
5.
6.
Lower the blade unit into the motor unit.
7.
Press the bottle down to run the motor. Release it to stop the motor.
8.
For "hands free" operation, turn the bottle left to run the motor (FIG A), then back, to stop.
9.
Once finished, lift the bottle off the motor unit, turn it upright, unscrew the blade unit then screw the
lid onto of the bottle.
10. Flip the cap on the lid open to pour, press it closed to store.
USING THE COOLING TUBE
The cooling tube helps to keep your drink cooler and fresher for longer.
1.
Open the cooling tube screw cap and fill the tube with water to the MAX mark on the tube.
2.
Replace the screw cap.
3.
Place the cooling tube in the freezer (or freezer compartment of your fridge) until the water inside
has frozen.
4.
Once frozen, screw the cooling tube into the underside of the lid (FIG B)
5.
Follow the previous instrctions to make your drink and once made, fit the lid and cooling tube to the
bottle. Remember, when using the cooling tube only fill the bottle up to the cooling tube MAX
marking (
).
MAX
CARE AND MAINTENANCE
1.
Unplug the appliance.
2.
Wipe the the motor unit with a damp cloth.
3.
Remove the seal with something blunt, like the handle of a fork.
4.
Hand wash the removable parts.
5.
Press the seal back into place with something blunt, like the handle of a fork.
¬ You may wash these parts in the top rack of a dishwasher.
If you use a dishwasher, the harsh environment inside the dishwasher will affect the surface finishes.
The damage should be cosmetic only, and should not affect the operation of the appliance.
RECYCLING
To avoid environmental and health problems due to hazardous substances, appliances
W
and rechargeable and non-rechargeable batteries marked with one of these symbols
must not be disposed of with unsorted municipal waste. Always dispose of electrical
and electronic products and, where applicable, rechargeable and non-rechargeable
batteries, at an appropriate official recycling/collection point.
4
