Sharp BK-RS08EB Guia De Inicio Rapido página 11

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 48
When done, press the Mode button to go back to main settings menu.
If there is no action in one minute, it will exit the setting page
automatically.
Connect to SHARP Life APP
Press and hold the Mode button for 2 seconds, and enter the Settings
interface.
Select the About and scan the QR Code to download the SHARP Life APP
on your phone. Then link your lovely e-bike to your phone on the APP.
Error Code
If something is wrong with the electrical system, it will show an error code
on the display. Don't hesitate to get in touch with our service center to
troubleshoot the problems.
Here are definitions of the error codes.
Error code
21
23
24
30
How to use the lights
How to charge
a. Open the rubber cap and connect the light to a power supply with the
attached USB cable.
b. It finishes charging when the indicator light turns green.
c. Close the rubber cap after charging.
How to use the front light
Push the button to turn the light on.
Then Push to dim the brightness. Push again to turn the light off.
How to use the tail light
Push the button to turn the light on or off.
Definition
Abnormal current
Motor out of phase
Motor Hall signal Fault
Communication Problem
SHARP Life App
Add the SHARP Life app to your mobile device to start enjoying the
benefits of additional functionality. This includes:
ū Speed monitoring on your device.
ū Changing the speed/distance units between kilometers and miles.
Click on "Add Device", when the e-bike is turned on and the Bluetooth icon
is flashing on the display.
Your device will scan automatically for your e-bike. Make sure that the
Bluetooth function is enabled on your phone. Allow location services if
requested.
Once the device is found, Bluetooth pairing is complete.
NOTE:
If you want to connect to the e-bike with a new account, there are two
ways:
1. Remove device from previous account.
2. Press and hold the button 'i' Mode and the button '-' at the same time
for 2 second to unbind the Bluetooth of the display, and then the new
account can connect with it.
To add your e-bike to the app.
https://www.sharpconsumer.com/sharp-life-app
EN
loading

Este manual también es adecuado para:

Bk-rs08es