Idiomas disponibles
Idiomas disponibles
Shutting Off Burners
1. Turn knob(s) clockwise to HI position, then push in and turn to OFF. Never force knob without
pushing in, as this can damage valve and knob.
2. Promptly close gas cylinder valve.
When performing cleaning and maintenance of the burners, always ensure burner ports are properly
aligned with valve openings after reinstalling on the griddle. See figure for correct alignment.
Lighting Burner with
a Match
1. Make sure all burner knobs are in OFF position.
2. Open valve on LP gas cylinder.
3. Push in and rotate knob counterclockwise to
"HI" position.
4. Place match in match holder installed on the side of
the griddle housing. Once match is lit, place flame
through hole on left side of the body near burner
ports. Burner should light immediately.
5. Adjust knobs to desired cooking settings.
Observe Flame
Height When Lit
Flame should be blue and yellow in color and
approximately 1/2 in. - 3/4 in. (1.2 cm - 1.9 cm) tall on
HI setting.
0.5"
Burner Ports
Match Holder
High
Low
C-5
