Idiomas disponibles
Idiomas disponibles
GB
Please read this instruction manual
before using the device for the first
time and comply with it.
Keep this instruction manual for
future reference or for subsequent
possessors.
Technical Specifications
Art.
Number of LEDs:
Lithium-ion batteries:
Voltage of mains adapter: 230 V, 50/60 Hz
Charging time:
Running hours:
Service life of LED:
Degree of protection:
Storage temperature:
Operating temperature:
Charging Process
■
Before taking the hand lamp into service for the
first time charge it for 6-8 hours.
Fully charge the hand lamp before it is stored for a
■
longer period.
Connect mains adapter with the hand lamp.
■
Switch lamp off during charging.
■
The LED (indicator light) of the lamp switches to
■
RED during charging.
If charging is completed, the LED (indicator light)
■
of the lamp switches to GREEN.
■
If the indicator does not turn CONSTANT RED,
unplug the charger & then try again.
For Your Safety
0827 940 10
4 х SMD
3.7 V, 1.200 mAh
approx. 4 hours
approx. 3 hours
up to 50,000 hours
IP 20
–20 °C to +45 °C
–5 °C to +40 °C
Warning - Do not look directly into
the light emitting lamp - Risk of eye
injuries!
Always only use the charger recommended by
the manufacturer to charge the lamp. The use of a
NON-recommended charger can lead to a fire and
destroy the lamp.
Safety instructions for hand-held/
work lamps
Do not open the device.
■
■
There is a risk of short-circuit. Repairs on the device
may only be carried out by commissioned and trai-
ned persons. Please contact your Würth branch.
Protect the battery against heat,
■
e. g., against continuous intense
sunlight, fire, water, and moistu-
re. Danger of explosion.
If the battery is damaged or not used
■
correctly;
•
vapours may leak and irritate the respiratory
system. Provide fresh air and contact a doctor in
the event of any discomfort.
•
fluids can leak from the battery. Avoid contact with
these. Leaking battery fluids can lead to skin irri-
tation or burns. Rinse off with water if you should
come into contact. If the fluid gets into your eyes,
make sure you get medical help.
•
there can be an internal short-circuit, the battery
may become overheated and explode or catch
fire.
Any damaged device or charger may no
longer be used and may be exchanged by
the manufacturer only.
■
The lamp may not be used in potentially explosive
areas.
■
Only stand the lamp on its head when it is swit-
ched off.
5
