Be Cool BCP12KL2401FW Instrucciones De Uso página 138

Find here some hints to achieve the optimal performance of the air conditioner:
Close windows and doors in the room to be air-conditioned.
Protect the room from direct sunlight with curtains, blinds or shutters.
This will save you energy.
Do not place any objects on the appliance and do not cover the air inlet and outlet. Keep the grilles
clear.
Make sure that no heat sources are operating in the room.
Never use the appliance in very humid rooms (e.g. laundry rooms).
Do not use the appliance outdoors.
Make sure that the air conditioner is placed on a level floor.
COOLING MODE
•
After switching on, the default setting is cooling mode. After the cooling mode is selected, the
cooling indicator lights up.
•
Press the up/down button to adjust the set temperature from 16°C to 30°C.
•
Press the speed button to select between the speed levels High/Medium/Low.
VENTILATOR MODE
•
After the fan mode has been selected with the remote control, the wind indicator lights up.
•
Press the speed button to select between the speed levels High/Medium/Low.
The temperature cannot be adjusted.
DEHUMIDIFICATION MODE
In dry mode, the dry indicator light is activated.
Remove the water plug on the back of the appliance as shown in the
illustration. Insert the water pipe (not supplied) and place the other end
in a water tank or drain.
In dry mode, the compressor starts when the room temperature is higher
than ≥17℃ (63℉). The compressor follows the following rules:
•
When the room temperature is ≤15℃ (59℉), the compressor is switched off.
•
When the room temperature is ≥17℃ (63℉), the compressor is restarted. (The restart takes
place after three minutes due to the protective function).
TIPS FOR CORRECT APPLICATION
HANDLING INSTRUCTIONS
138