Idiomas disponibles
Idiomas disponibles
9
LUBRICATION
9.4
MACHINE
Before using the machine for the first time, lubricate
the following points using an lubrication gun and
recommended grease:
Cutting cylinder bearings (A Fig. 9.4a)
Front roll spindle
lubricate the following points using an lubrication gun
and engine oil:
Landroll (A Fig. 9.4b)
In addition to the above, oil all linkages and pivot
points etc.
Daily (Every 8 working hours)
Lubricate as above.
RANSOMES SMALL PEDESTRIAN RANGE
SAFETY, OPERATORS & MAINTENANCE MANUAL
Fig. 9.4a
Fig. 9.4b
GB-33
