Hilti TE 50 Manual De Instrucciones página 21

Power tool
Mains frequency
Weight in accordance with EPTA procedure 01/2003,
TE 50
Weight in accordance with EPTA procedure 01/2003,
TE 50-AVR
Dimensions (L x W x H)
en
Speed under no load
Single impact energy in accordance with EPTA proced-
ure 05/2009
Drilling dia. range in concrete/masonry (hammer
drilling)
Breach bits
Percussion core bits
Drilling dia. range in wood (solid)
Drilling dia. range in metal (solid)
NOTE
The vibration emission level given in this information sheet has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment
of exposure. The declared vibration emission level represents the main applications of the tool. However if the tool is
used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total working period. An estimation of the level of exposure to
vibration should also take into account the times when the tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety
measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
Noise and vibration information (measured in accordance with EN 60745‑1 ):
Typical A-weighted sound power level, TE 50-AVR
Typical A-weighted sound power level, TE 50
Typical A-weighted emission sound pressure level, TE
50-AVR
Typical A-weighted emission sound pressure level, TE
50
Uncertainty for the given sound level
Triaxial vibration value for the TE 50‑AVR (vibration vec-
tor sum)
Drilling in metal, (a
Triaxial vibration value for the TE 50‑AVR (vibration vec-
tor sum)
Hammer drilling in concrete, (a
Chiseling, (a
h, Cheq
Triaxial vibration value for the TE 50 (vibration vector
sum)
Drilling in metal, (a
Triaxial vibration value for the TE 50 (vibration vector
sum)
Hammer drilling in concrete, (a
Chiseling, (a
h, Cheq
Uncertainty (K) for triaxial vibration value
18
)
h, D
)
h, HD
)
)
h, D
)
h, HD
)
TE 50 / TE 50‑AVR
50...60 Hz
5.7 kg
5.8 kg
462 mm x 113 mm x 243 mm
550/min
5.2 J
∅ 12...32 mm
∅ 30...32 mm
∅ 45...90 mm
∅ 6...35 mm
∅ 6...13 mm
104 dB (A)
106 dB (A)
93 dB (A)
95 dB (A)
3 dB (A)
Measured in accordance with EN 60745‑2‑1 prAA:
2005
< 2.5 m/s²
Measured in accordance with EN 60745‑2‑6 prAB:
2005
11.4 m/s²
8.1 m/s²
Measured in accordance with EN 60745‑2‑1 prAA:
2005
< 2.5 m/s²
Measured in accordance with EN 60745‑2‑6 prAB:
2005
16.1 m/s²
11.3 m/s²
1.5 m/s²