Assembly - Delta 22-580 Manual De Instrucciones

Fig. E
1. 13" (330 mm) Two-Speed Finishing Planer
2. Cutterhead Adjusting Handle
3. Cutterhead Lock Handle
4. M5-16 mm Hex Socket Head Screw
For your own safety, do not connect the machine to the power source until the machine is
completely assembled and you read and understand the entire instruction manual.
ASSEMBLY TOOLS REQUIRED
Cutterhead Wrench (Supplied)
ASSEMBLY TIME ESTIMATE
Approximately 1/2 hour
OPTIONAL 4" (101 mm) REVERSIBLE DUST COLLECTION ATTACHMENT
To attach an optional dust collection attachment (A) Fig. 1 to mount a dust collection system to the planer.
1. Remove the two screws (A) Fig. 2 that secure the cutterhead guard.
2. Place the dust connector in the slots provided and replace the cutterhead guard screws (A) Fig. 2.
NOTE: You can mount the attachment on either side of the machine.
Fig. 1
1

ASSEMBLY

A
7
Fig. F
5. M6-20 mm Hex Socket Head Screw
6. Knife Transfer Tool
7. Cutterhead Wrench and Handle Combination
8 -
English
3
2
6
Fig. 2
A
4
5
Fig. 2