is warranted for the period of the time up to the
first scheduled replacement for that part. Any part
repaired or replaced under the warranty must be
warranted for the remaining warranty period.
DIAGNOSIS: You will not be charged for diagnostic
labor that leads to the determination that a warranted
part is in fact defective, provided that such diagnostic
work is performed at a brand authorized servicing
dealer.
OTHER DAMAGES: Husqvarna Professional
Products, Inc will repair other engine components
caused by the failure of a warranted part still under
warranty.
EMISSION WARRANTY PARTS LIST
1. Carburetor and intake parts or fuel injection
system.
2. Air filter and fuel filter covered up to maintenance
schedule.
3. Spark Plug, covered up to maintenance
schedule.
4. Ignition Module.
5. Mufflers with catalyst and exhaust manifolds.
6. Fuel tank, fuel lines (for liquid fuel and fuel
vapors), fuel cap, carbon canister and tip-over/
anti-slosh valves as applicable.*
7. Electronic Controls, Vacuum, temperature, and
time sensitive valves and switches.
8. Hoses, connectors, and assemblies.
9. All other components the failure of which would
increase the engine's exhaust and evaporative
emissions of any regulated pollutant as set forth
at the following:
•
For U.S. and Canada see US Federal Code
of Regulations, 40 C.F.R 1068 Appendix I
(iii).
WHAT IS NOT COVERED
All failures caused by abuse, neglect, unapproved
modifications, misuse or improper maintenance are
not covered.
ADD -ON OR MODIFIED PARTS: Add-on or
modified parts that are not exempted by EPA may
not be used. The use of any non-exempted add-on
or modified parts will be grounds for disallowing a
warranty claim. Husqvarna Professional Products,
Inc will not be liable to warrant failures of warranted
parts caused by the use of a non-exempted add-on
or modified part.
HOW TO FILE A CLAIM
If you have any questions regarding your
warranty rights and responsibilities, you should
contact your nearest authorized servicing dealer
or call Husqvarna Professional Products, Inc
in USA at 1-800-487-5951, in CANADA at
1-800-805-5523 or send e-mail correspondence to
emissions.com.
2318 - 003 - 02.04.2024
WHERE TO GET WARRANTY SERVICE
Warranty services or repairs are provided through
all Husqvarna Professional Products, Inc authorized
servicing dealers. If the nearest authorized servicing
dealer is more than 100 miles from your location,
Husqvarna Professional Products, Inc will arrange
and pay for the shipping costs to and from a brand
authorized servicing dealer or otherwise arrange
for warranty service in accordance with applicable
regulations.
MAINTENANCE, REPLACEMENT AND REPAIR OF
EMISSION-RELATED PARTS
Any replacement part may be used in the
performance of any warranty maintenance or repairs
and must be provided without charge to the owner.
Such use will not reduce the warranty obligations of
the manufacturer.
MAINTENANCE STATEMENT
The owner is responsible for the performance of
all required maintenance, as defined in the owner's
manual.
* Evaporative emission parts.
21