Troubleshooting - cecotec Bolero Flux TT 605500 Glass Black A++ Manual De Instrucciones

ENGLISH

6. TROUBLESHOOTING

Fault
The power light is on,
but the motor does not
run.
Neither the light bulb
nor the motor work
Grease falls out of the
aluminium filters
The kitchen hood
vibrates
The kitchen hood is not
sufficiently extracting
54
BOLERO FLUX TT 605500 GLASS BLACK A++ / WHITE A++
BOLERO FLUX TT 905500 GLASS BLACK A++ / WHITE A++
Cause
The kitchen hood is obstructed
The condenser is damaged
Motor is jammed or bearing
damaged
Motor is burnt or gives off a bad
smell
In addition to the above, check the following:
The light bulb has blown
Power cable is loose
The filters are very dirty
The fan is damaged, causing the
kitchen hood to vibrate when
extracting air.
The engine is not securely
fastened
The kitchen hood is not securely
fastened
The distance between the
kitchen hood and the cooking
surface is too large.
Too much ventilation due to open
doors or windows
Solution
Remove what is obstructing
the hood
Replace the condenser
Replace the motor
Replace the motor
Replace the light bulb
Connect the cables according
to the wiring diagram
Clean or replace the
aluminium filters
immediately
Replace the fan
Fix the engine correctly
Fix the kitchen hood correctly
Readjust the distance
Relocate and reinstall the
kitchen hood