cecotec Bolero Flux TT 605500 Glass Black A++ Manual De Instrucciones página 10

- All installation work must be carried out by a competent
person or a qualified electrician.
- Dispose of the packaging material carefully. Children are
vulnerable to it.
- Pay attention to sharp edges inside the kitchen hood,
especially during installation and cleaning.
- Make sure that the duct does not have bends sharper than
90 degrees, as this will reduce the efficiency of the kitchen
hood.
- Warning: Failure to install the screws or fastening device in
accordance with these instructions may result in electrical
hazards
- Warning: Before accessing the electrical terminals, all power
supply circuits must be disconnected.
- There must be adequate ventilation of the room when the
kitchen hood is used at the same time as gas or other fuel
burning appliances.
- Caution: The appliance and its accessible parts may become
hot during operation. Be careful not to touch any accessible
parts. Children under 8 years old must stay away, unless
they are supervised.
- It must comply with the local regulations in force regarding
air discharge.
- For safety reasons, only use the supplied fixing or mounting
screws (if applicable, depending on the model) or screws
of the same size as those recommended in this instruction
manual.
- You should not use a steam cleaner.
- NEVER try to put out the fire with water. Instead, turn off the
appliance and smother the flame with, e.g., a fireproof lid or
blanket.
- Never use extension cables, multiple socket connections or
external timer connection elements.
10
BOLERO FLUX TT 605500 GLASS BLACK A++ / WHITE A++
BOLERO FLUX TT 905500 GLASS BLACK A++ / WHITE A++