Idiomas disponibles
Idiomas disponibles
YOU NEED TOOLS FOR INSTALLATION. (not supplied with the range)
Screwdriver
Protective
gloves
Door handle installations
The door handle is not pre-installed. Follow the illustrations
below to install the door handle quickly and easily.
1. Align the handle with the screw on the door.
2. Then tighten the hexagon socket screws on the handle with a hexagon socket screwdriver.
Chef door （for 30'' oven of FFSGS6439-48)
1. Remove the black rubber cap on the inside of oven door. (Do not throw it away).
2. Insert the screwdriver to the hole to reach the embedded screw.
3. Position the handle holder correctly to accept the screw bolt on the outside of oven door, tighten the
screw.
4. Repeat step No. 1 to 3 for the other side.
5. Put the black rubber caps back to cover the two holes on the inside of oven door.
Wrench
Socket wrench
Adjustable
Hammer
wrench
Allen key
Adjustable
pliers
13
Tape measure
&Pencil
Drill
