Control Techniques Commander SE11200025 Guia Del Usuario página 63

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

No.
Function
No. of
40
poles
When Auto is selected, the drive automatically calculates the number of motor poles of
the machine from the settings in parameters 07 and 39. If either of these parameters are
adjusted for a special motor or to modify the V/f characteristic, the automatic calculation
may calculate the number of motor poles incorrectly. This would cause an incorrect slip
compensation to be applied and the rpm speed indication would be incorrect. Therefore,
the correct number of motor poles should be programmed manually.
No.
Function
Serial
41
mode
Used to select the mode of operation of the serial port
AnSI
ANSI EIA485 2 wire half duplex serial communications
rtu
Modbus RTU protocol
FbUS
Fieldbus protocol
When parameter 41 is set to FbUS, parameter 42 'baud rate', is automatically set
NOTE
to 19.2.
No.
Function
Baud rate
42
Used to select the comms port baud rate
2.4
2400 baud
4.8
4800 baud
No.
Function
Serial
43
address
Used to define the unique address for the drive for the serial interface. Any number in the
permitted range 0.0 to 24.7 which has a zero in it should not be used as these are used
in addressing groups of drives.
No.
Function
Software
44
version
Indicates the version of software fitted to the drive.
No.
Function
Fieldbus
45
Node
Address
No.
Function
Fieldbus
46
Baud rate
No.
Function
Fieldbus
47
Diagnostics
Commander SE User Guide
Issue Number 9
Type
Limitations
RW
T
Type
Limitations
RW
T, R
Type
Limitations
RW
T
9.6
9600 baud
19.2
19200 baud
Type
Limitations
RW
U
Type
Limitations
RO
U
Type
Limitations
RW
U
Type
Limitations
RW
U
Type
Limitations
RW
B
www.controltechniques.com
Range
Units
Auto, 2P,
4P, 6P, 8P
Range
Units
AnSI, rtu, FbUS
Range
Units
2.4, 4.8, 9.6, 19.2.
Range
Units
0.0 - 24.7
Range
Units
1.00 - 99.99
Range
Units
0 - 255
Range
Units
0 - 9
Range
Units
-9999 - +9999
Defaults
Auto
EUR
Auto
USA
Defaults
AnSI
EUR
AnSI
USA
Defaults
4.8
EUR
4.8
USA
Defaults
1.1
EUR
1.1
USA
Defaults
-
EUR
-
USA
Defaults
0
EUR
0
USA
Defaults
0
EUR
0
USA
Defaults
0
EUR
0
USA
63

Hide quick links:

Tabla de contenido
loading

Tabla de contenido