Maintenance
WARNING
• Do not clean the dryer by directly spraying water onto the dryer.
• Do not clean the dryer with benzene, thinner, alcohol, or acetone. This may cause discoloration,
deformation, damage, electric shock, or fire.
• Before cleaning the dryer, be sure to unplug the power cord.
• Certain internal parts are intentionally not grounded and may present a risk of electric shock only
during servicing. Service Personnel - Do not contact the following parts while the appliance is
energized: Control board, Motor, Drain pump.
Control panel
• Clean with a soft, damp cloth. Do not use abrasive substances.
• Do not spray liquid cleaning agents directly on the display of the dryer.
• Some laundry pre-treatment soil and stain removers may damage the control panel.
• When using liquid cleaning agents, apply them to the cleaning cloth. Do not apply them directly to the
dryer. Wipe up any spills or overspray immediately.
Tumbler
• Remove any stains from the tumbler with an all-purpose cleaner.
• Tumble old towels or rags to remove any remaining stains or cleaning substances. Stains may still be
visible, but will not affect subsequent loads.
Stainless steel tumbler
To clean the stainless steel tumbler, use a damp cloth with a mild, non-abrasive cleaner suitable for easily
marred surfaces. Remove cleaner residue and dry with a clean cloth.
Dryer exterior
• Clean with a soft, damp cloth. Do not use abrasive substances.
• Protect the surface from sharp objects.
• Do not place any heavy or sharp objects or a detergent container on the dryer. They can scratch or
damage the top cover of the dryer.
• The dryer has a high-gloss finish on the entire surface. Be careful not to scratch or damage the surface.
Lint filter
Clean the lint filter after each load.
DV6900B_SimpleUX_WEB_Heatpump_EN.indd 49
DV6900B_SimpleUX_WEB_Heatpump_EN.indd 49
English 49
2023/8/11 19:14:51
2023/8/11 19:14:51