Idiomas disponibles
Idiomas disponibles
times a year. Its replacement will depend on how the kitchen hood is used, as well as the
daily operating time.
-
In case of very frequent frying, shorten the time interval for checking and/or replacing the
carbon filters.
Installing the carbon filters
1.
Remove the protective metal filters.
2.
The carbon filters are located on both sides of the motor. Insert and turn the filters, until
they are firmly in place.
3.
To replace the carbon filters, proceed in reverse order.
4.
Carbon filters must not be exposed to heat.
Fig. 9:
A: Closed
B: Opened
C: Opened
D: Closed
Article No 02865 > Φ132*18.5 mm
Carbon filter dimensions:
Article No 02867 > Φ176*35 mm
Replacing the light bulb/lamp
Please note:
-
The light bulb must be replaced by the official Cecotec Technical Support Service or
similarly qualified technicians.
-
Always disconnect the power supply before performing any operation on the appliance.
When handling the bulb, make sure that it has cooled down completely before any direct
contact with your hands.
-
When handling the bulbs, hold them with a cloth or gloves to prevent sweat from coming
into contact with the bulb, as this may reduce the bulb life.
Note:
-
Before changing the light bulb, make sure that the appliance is switched off and unplugged.
-
Protect yourself from danger when changing the light bulb, e.g. by wearing gloves.
BOLERO FLUX IM 523500 INOX A / IM 756500 INOX A
ENGLISH
49
