Idiomas disponibles
Idiomas disponibles
Make sure that the duct does not have bends sharper than 90
degrees, as this will reduce the efficiency of the kitchen hood.
Warning: failure to install the screws or fastening device
in accordance with these instructions may result in
electrical hazards.
Warning: before accessing the electrical terminals, all power
supply circuits must be disconnected.
There must be adequate ventilation of the room when the
kitchen hood is used at the same time as gas or other fuel
burning appliances.
Caution: the appliance and its accessible parts may become
hot during operation. Be careful not to touch any accessible
parts. Children under 8 years old must stay away, unless
they are supervised.
Local air discharge regulations must be complied with.
For safety reasons, only use the supplied fixing or
mounting screws (if applicable, depending on the model)
or screws of the same size as those recommended in this
instruction manual.
You should not use a steam cleaner.
NEVER try to put out the fire with water. Instead, turn off the
appliance and smother the flame with, e.g., a fireproof lid
or blanket.
Never use extension cables, multiple socket connections or
external timer connection elements.
If the power cord is damaged, it must be replaced by the
official Cecotec Technical Support Service or by similarly
qualified technicians to prevent hazards.
The appliance must not be operated if the power supply
cable is damaged or cut.
If the appliance stops working or malfunctions abnormally,
disconnect it from the mains and contact the official Cecotec
10
BOLERO FLUX IM 523500 INOX A / IM 756500 INOX A
