hafele Dialock DTSH Instrucciones De Montaje página 62

Fig. 48
Fig. 49
The internal and external modules are now installed
A mechanical check must be performed when assembly is complete.
Push the lever handle on the inside of the door to operate the mortise lock:
 Pull back the latchbolt (escape function), or the latchbolt and deadbolt,
depending on the type of mortise lock.
Push the lever handle on the outside:
The coupling is disconnected, i.e. the lever handle has no effect, but it
must be automatically returned to the horizontal idle position via the return
spring. If this is not the case, check the individual assembly steps
DTSH FH:
Have confirmation of installation signed by fitter as documentation
for the customers's construction file.
62 Dialock Door Terminals DTSH, DTSH FH - Status: 07.2008 - 732.29.134
10. And tighten screw.
Always use the original grub screws in
the provided small parts bag.
 Remove other grub screws from lever
handle aperture part if necessary.
Always use the provided lever handle with
the DTSH FH.
The small parts bag for the FH version
does not contain any grub screws. The
screws of the lever handle are used in
this case.
11. Mount inner and outer lever handle to the rel-
evant square spindle and tighten grub screws
using Allen key (3 mm).
Installation Instructions