Factory Reset; Reset Of The Device; Rs-485 Port; Connection To The Indoor Unit - Airzone Aidoo Pro Guía Rápida

Factory reset

This button allows you to restore the device to factory settings by pressing it continuously for
more than 10 seconds.
EN

Reset of the device

Allows you to reset the device without removing any previously set configuration parameters.

RS-485 port

RS485 port for connecting the AirQ Box or AirQ Sensor
accessories, or for establishing Modbus RTU, BACnet MS/TP
or Lutron communication with the device.

Connection to the indoor unit

This terminal allows the device to communicate with the ventilation unit via the Modbus
connection cable.

Diagnostic LEDs

Digital input

Configurable voltage free input to switch the unit on/off.
Note: it is recommended that the wiring of the digital inputs be routed through a separate
conduit.
6
Connecting to a Wi-Fi network
Connected to a Wi-Fi network
Connected to the server
Not configured
Cloud Communications
Microprocessor activity
Power supply
Transmission of data to the indoor unit
Reception of data from the indoor unit
Meaning
Blinking
Steady
Steady
Off
Blinking
Blinking
Steady
Blinking
Blinking
Green
Blue
-
Red
Green
Red
Red
Green