Idiomas disponibles
Idiomas disponibles
COMPACT ECO SERIE
3.6 Starting and Ending the Welding Process
• Determine the Coarse Adjustment ", Fine Adjustment" and Wire Feed Speed from the welding parameters
table of your machine according to the diameter of the wire you will use, the type of gas you will use and the
thickness of the material to be welded, and set your machine to these settings.
Wire Diameter
Material Thickness
Wire Feeding Speed
Current
Voltage
• You can start welding after making sure that you comply with all safety rules and take the necessary
precautions.
• During welding, instantaneous welding voltage will be displayed in voltmeter and instantaneous welding
current will be displayed in ammeter.
When not welding, leave the torch in such a way that it does not touch the workpiece, the welding
• After you have finished working with the welding machine, allow the machine to cool down and turn the
pliers, the hood of the machine and the trigger does not remain pressed.
on / off switch to "0". Unplug the machine and close the gas cylinder
3.7 Welding Parameters
• The welding parameters were obtained by horizontal welding with solid wire in laboratory conditions.
Values may vary depending on the application and ambient conditions.
ID 250 MK/MKW ECO
www.magmaweld.com
Operation
27
ID 350 MK/MKW ECO
USER MANUAL
EN
