Bodum BISTRO Instrucciones De Uso página 20

STARTING THE
BAKING PROGRAM
appliance will open the inner flap of the ingredients box to leave
the content fall into the bread pan. Open the slider of the ingredi-
ents box to fill in your food. Thereafter, close the slider.
IMPORTANT: Always leave the appliance cool down, before starting
a new baking process. If the display is showing H:HH after starting
a new program, the temperature in the heating compartment is too
high. In this case, immediately unplug the appliance and open the
lid until the appliance has reached ambient temperature.
1. Prepare the appliance for operation according to the instructions
above and close the lid (see: "Preparation").
2. Insert the power plug into the wall power outlet. (See: "Important
Safeguards for Electrical Appliances") An acoustic signal sounds
and the LCD screen shows the program number 1 and the defaults
of this baking program (operation time, colour and amount).
TIP: The buttons respond even to slight touches. Simply tip on the
buttons with your finger. A beep sounds with each entry. Names and
numbers of the available programs are printed on the lid.
The buttons of the appliance are inactive, whenever the respective
function is not available with the currently selected program, or
while a program is running, or when the control panel is locked (see:
"Locking the Control Panel"). Running programs must be terminated
first using the START/STOP button, when you wish to make new entries.
3. Select your desired program by slightly touching the MENU but-
ton. (See: "Programs of the Bread Maker") Each input is confirmed
by an acoustic signal.
4. Use the CRUST COLOR button to select the desired colour of your
bread. The icon on the bottom of the LCD screen shows whether
you have chosen light, medium, or dark.
5. Use the WEIGHT button to select the used total amount of all
ingredients according to your recipe: 500 g, 750 g, or 1000 g.
6. Thereafter, if required, you can set the finishing time duration for
the baking process via the timer function. You can enter a maxi-
mum delay of up to 15 hours. See: "Using the Timer".
IMPORTANT: If the display shows unusual information after the pro-
gram has been started (H:HH or E:E0), then immediately unplug the
appliance. See "Solving Problems" for further information.
7. With the desired settings on the LCD screen, start the baking
program by touching the START/STOP button. The dots of the
program time and the icon of the actual operating phase will
flash. The program will automatically run various operations.
During operation, only the START/STOP button is active. You can
watch the process via the window in the lid of your Bread Maker.
Occasionally, during various program phases, condensate could
accumulate on the window.
TIP: The appliance lid can be opened during kneading, for example,
to add further ingredients. For this, you should pause operation (see:
"Functions of the Buttons"). Use this way for adding powder and
wet or sticky ingredients. However, you should avoid opening the lid
20