Electrolux Y63IV443 Manual De Instrucciones página 81

To activate automatic operation of the
function, deactivate the hob and activate
it again.
Activating the light
You can set the hob to activate the light
automatically whenever you activate the hob.
To do so set the automatic mode to H1 – H6.
7. HINTS AND TIPS
WARNING!
Refer to Safety chapters.
7.1 Cookware
For induction cooking zones a strong
electro-magnetic field creates the heat in
the cookware very quickly.
Use the induction cooking zones with suitable
cookware.
• To prevent overheating and improve the
performance of the zones, the cookware
must be as thick and flat as possible.
• Ensure cookware bases are clean and dry
before placing on the hob surface.
• Always be careful no to slide or rub the
cookware on the edges and corners of the
glass as it may chip or damage the glass
surface.
Cookware material
• correct: cast iron, steel, enamelled steel,
stainless steel, multi-layer bottom (with a
correct marking from a manufacturer).
• not correct: aluminium, copper, brass,
glass, ceramic, porcelain.
Cookware is suitable for an induction hob
if:
• water boils very quickly on a zone set to
the highest heat setting.
• a magnet pulls on to the bottom of the
cookware.
Cookware dimensions
• Induction cooking zones adapt to the
dimension of the bottom of the cookware
The light on the hood deactivates 2
minutes after deactivating the hob.
automatically. Refer to "Technical data" >
"Cooking zones specification" for correct
cookware dimensions. Place the cookware
in the centre of the selected cooking zone.
• The efficiency of a cooking zone is related
to the diameter of the cookware. For
optimal heat transfer use cookware with
bottom diameter similar to the size of the
cooking zone (i.e. the maximum cookware
diameter value in "Technical data" >
"Cooking zones specification").
– Cookware with a diameter smaller
than the size of a given cooking zone
receives only part of the power
generated by the cooking zone which
results in slower heating.
– For both safety reasons and optimal
cooking results, do not use cookware
larger than indicated in "Cooking
zones specification". Avoid keeping
cookware close to the control panel
during the cooking session. This might
impact the functioning of the control
panel or accidentally activate hob
functions.
Refer to "Technical data".
7.2 Noises during operation
The noises are normal and do not
indicate any malfunction. Cookware
noises may vary depending on the
cookware material and the power level.
Cookware-related noises:
ENGLISH 81