Bergstrom EVER Manual De Usuario página 24

EN EVER
24
TU ESPACIO DE VIDA CONFORTABLE
USER'S HANDBOOK MANUAL DE USUARIO MANUAL DE USUARIO
Assembling the winter protection covers
It is recommended to cover the cooler's front and side air intake grilles with the
provided protective covers when the unit will not be in use for extended periods,
especially during winter. These protection covers are marked with the word
"WINTER" on the back.
Front protection cover (Photo A):
Used to cover the cooler's front air input, as shown in the photo.
Adjust the protection cover by fastening it at both ends; first one and then the other,
inserting the tabs in the housing holes in the base of the unit.
Side protection covers (one on each side; Photo B)
Used to cover the cooler's 2 side grilles, as shown in the photo.
The covers will be adjusted by fastening them at both ends; first one and then the
other, inserting the tabs in the housings in the sides of the unit's base.
Disassembling the winter protection covers
To remove the protective covers, release each fastening tab from the housings in
the cooler's base.
IMPORTANT
The EVER-ecological cooler works by taking air from outside the vehicle. This air
must not remain inside, as this would lead to excess humidity. All current vehicles
are equipped with air renewal grilles; if they are not fitted, the installer must install
them to ensure ventilation in the vehicle.
The user should also regularly check that the fan grilles are not blocked.
The user must also regularly check (at least every 6 months) the condition of the
vehicle connection cables, especially the seal tight connectors.
CAUTION: Failure to comply with these instructions may result in injury to persons,
damage to components, or equipment malfunction.
CAUTION: EVER should only use potable water for operation.