Idiomas disponibles
Idiomas disponibles
Note: Before pressing trigger, make sure lock-off switch is in" unlock" position.
Warning: Do not start the machine without connecting and turning on the water supply because it may cause damage to high pressure
seals and reduce the service life of pump.
3. Select the right nozzles
Squeeze the trigger, high pressure water flow will come out. You could rotate
Adjustable nozzle collar to change it from a full fan spray (diagram 1) to a direct stream
spray (diagram 2).
Note: When replacing and adjusting the rotary nozzle and nozzle holder, the trigger must bereleased.
Warning: When operating the machine, it is forbidden to use in the inverted state.
Warning: High pressure jets can be dangerous if subject to misuse. The jet must not be directed at persons, live electrical equipment or the
appliance itself.
Warning: When operating the machine, it is forbidden to use in the inverted state.
Warning: High pressure jets can be dangerous if subject to misuse. The jet must not be directed at persons, live electrical equipment or the
appliance itself.
4. Cleaning
Begin with the nozzle 1-2ft away from the surface and approach with caution until it reaches the desired position for overly close spray may
do harm to surface.
Warning: Do not connect the machine to water supplies that are dirty, rusty, muddy, or corrosive. ( Including window cleaning liquids, plant
foods, or fertilizers etc.)
24
Adres producenta/ Adresse des Herstellers/ Manufacturer's Address/ Адрес производителя
GTV Poland Sp. z o.o. Sp. k., ul. Przejazdowa 21, 05-800 Pruszków
