Idiomas disponibles
Idiomas disponibles
Refrigerator
Features
I
CAUTION
]
To avoid property damage or injury, observe the following:
• Confirm shelf is secure before placing items on shelf.
• Handle tempered glass shelves carefully. Shelves may break suddenly if
nicked, scratched, or exposed to sudden temperature
change.
Door
Stora
e
Milk
Savor
TM
(some
models)
The temperature-controlled
Milk Savor TM
keeps beverages and other items up to 5° F
(3 ° C) colder than the rest of the fresh food
section. Air inlet allows air from the freezer
section to pass to Milk Savor TM.
The Milk Savor TMcontrol is located
on the left wall of fresh food section.
Control adjusts amount of air circulating in
Milk Savor rM.Turn control clockwise for colder
temperature
To remove and install Milk SavorTM:
_dt
If located directly above Milk
_lmqL_Lo _
Savor, dairy center or door
_J=_l
bucket may need to be remove&
I _] !
/I
Refer to appropriate
instructions
1_i
and remove item, Slide Milk Savor_ _.__
I
assembly up and pull straight ouL
_-
To install, align one of the
Milk Savor T_ cold air intake
holes (A) with one of the two
air inlets (B) in door liner.
Push assembly down onto
door liner retainer until it stops.
IMPORTANT: Milk Savor Tr_ will not operate properly if
air intake holes are not aligned with air inlet in door
liner.
The dairy center provides convenient storage for items
such as butter, yogurt, cheese, etc.
This compartment
is an adjustable feature located in
the door. tt can be moved to several different locations
to accommodate
storage needs.
To remove and install bin:
•
To remove slide dairy center up
.
and pull out.
To install, slide assembly
in
above desired door liner
retainer and push down until it
stops.
To remove and install dairy door:
To remove
press in sides of dairy door and pull out,
To install slide sides of dairy door inside dairy
center until hinge points snap into place.
To install
in above desired door
liner retainer and )ush down until bucket stops.
Shelves
Spiliproof
Shelves
Spillproof stationary shelves hold
simple spills for easier cleaning.
To remove and install shelves:
To remove shelves, lift front of shelf to
release shelf hooks from metal track
and pull out to remove.
To install shelves, select point in metal track for
replacement and insert shelf hooks. Raise front of
shelf until hooks lock into place. Lower shelf front.
L
Drawers
Rack
(some
models)
The Can rack slides out from
underneath the spillproof stationary
shelf. The can rack holds up to
twelve 12-ounce beverage cans.
To remove and install can rack:
To remove, empty contents of can rack Pull can rack
forward to full extension and lift front to release
from shelf rail. Pull straight out to remove.
To install, reverse above procedure.
11
Drawer
(some
models)
This drawer can be used for storage of food items or
extra produce. Some models may have climate
controls to keep food fresh longer.
To remove and install snack drawer:
To remove, pull drawer out to full
extension. Tilt up front of drawer and
pull straight out.
To install reverse above procedure.
