Idiomas disponibles
Idiomas disponibles
ELECTRIC BRAKE
This tool is equipped with an electric brake. If the tool consistently fails to quickly stop after trigger is released, have tool
serviced at a service center.
REVERSING SWITCH ACTION
This tool has a reversing switch to change the direction of rotation. Depress the reversing switche lever from the B to A for
clockwise rotation or from the A to B for counterclockwise rotation.
When the reversing switch lever is in th center position, the trigger cannot be pulled.
SPEED CHANGE
CAUTION
Always check the direction of rotation before operation.
• Use the reversing switch only after the tool comes to a complete stop.
Changing the direction of rotation before the tool stops may damage
the tool.
• When not in use, always set the reversing switch lever to the center
position.
1.Reversing switch lever
To change the speed, first switch of the tool and then slide the speed
change lever to the „1" side for high speed or „2" side for low speed. Be
sure that the speed change lever is set to the correct position before
operation. Use the right speed for your job.
CAUTION
• Always set the speed change lever fully to the correct position. If you
operate the tool with the speed change lever positioned halfway
between
the „1" side and ‚2" side, the tool may be damaged.
• Do not use the speed change lever while the tool is running. The tool
may be damaged.
1. High speed
2. Low speed
3. Speed change lever
6
YEAR
1
WARRANTY
