Furius FIRE 12 KIT Manual De Usuario página 19

ASSEMBLY
FUNCTIONAL DESCRIPTION
INSTALLING OR REMOVING BATTERY PACK
• Always switch off the tool before insertion or removal of the battery pack.
• Always insert the battery pack all the way until it clicks in place. If not, it may accidentally fall out of the tool, causing injury
to you or someone around you.
• Do not use force when inserting the battery pack. If the battery pack can not be inserted in easily, it is not being inserted
carrectly.
• To remove the battery pack, withdraw it from the tool by pressing the Release Buttons on both sides of the battery pack.
CAUTION
Always be sure that the tool is switched off and the battery pack is
removed before canying out any work on the tool.
INSTALLING OR REMOVING DRIVER BIT OR DRILL BIT
Hold the collar and turn the chuck counterclockwise to open the clutch.
Place the bit in the clutch as far as it will go. Hold the collar firmly and
turn the chuck clockwise to tighten the clutch. To remove the bit, hold
the collar and turn the chuck counter-clockwise.
1. Keyless Chuck
2. Torque adjustment collar
3. Tighten
CAUTION
Always be sure that the tool is switched off and the battery pack is
removed
before canying out any work on the tool.
1. Release Button
2. Battery pack
CAUTION
Before inserting the battery pack into the tool, always check to see if the
trigger works properly, and returns to the „OFF" position when released.
1. Trigger
5
YEAR
1
WARRANTY