Idiomas disponibles
Idiomas disponibles
Charging operation
■ Charging the unit
1.
Connect one end of the included
TYPE-C Charging Cable to the
Charging Port on your speaker.
Then plug the other end of the USB
Charging Cable into a suitable USB
port on your computer, notebook
or power bank to recharge your
speaker's
battery.
2.
When charging, a red LED light will
illuminate to indicate that the unit
is charging. The red light will turn
off when your unit is fully charged
(under both turn-on/off speaker
status)
Before using any adapter with the charging cable, check whether the specifications
of the adapter meets the requirements. The recommended output voltage of the
adapter is DC5V+/-0.25V, and the recommended output current is 2A. An over-high
charging voltage may damage the charging cable and unit.
Warning:
Use the recommended adapter whenever possible. Using other types of adapters
may violate the warranty terms of the equipment and is hazardous. Use the provided
charging cable to connect with a certified adapter or computer to charge the unit.
GX-BT390_IM_US_EN.indd 16
GX-BT390_IM_US_EN.indd 16
internal
rechargeable
Note:
LED charging indicator status:
Red = Charging progress
Off = Charging completed
E-16
7/25/23 1:37 PM
7/25/23 1:37 PM
