Idiomas disponibles
Idiomas disponibles
Bluetooth Operation
■ Bluetooth pairing
To pair your Bluetooth audio device
to your Bluetooth Speaker for the first
time, follow the steps below:
1.
Make sure your Bluetooth audio
source is held within three meters
of your speaker.
2.
Press and hold the
your speaker to power it on. The
LED light will blink to indicate that
you have entered pairing status.
3.
Go to the Bluetooth Manager
of your Bluetooth audio source.
Please refer to the User's Manual
of your Bluetooth audio source for
more information.
4.
Search
select "GX-BT390 SHARP".
5.
Once paired, the LED light will
be solid and you can use your
speaker to listen to audio from your
Bluetooth sound source.
6.
Press and hold the
disconnect the Bluetooth from the
device.
GX-BT390_IM_US_EN.indd 12
GX-BT390_IM_US_EN.indd 12
button on
Bluetooth
devices
button to
■ Reconnect/ Timeout
After the unit has paired and connected, it
will reconnect automatically when the unit
is powered on and device in range.
Bluetooth time out: 10 minutes.
Notes:
●
The operation range between this unit
and a Bluetooth device is approximately
10 meters (without any object between
the Bluetooth device and the unit).
●
Before you connect a Bluetooth
device to this unit, ensure you know
the device's capabilities.
●
Compatibility with all Bluetooth
devices is not guaranteed.
and
●
Any obstacle between this unit and
a Bluetooth device can reduce the
operation range.
●
If the signal strength is weak, your
Bluetooth receiver may disconnect, but it
will re-enter pairing mode automatically.
●
Bluetooth playback from the source
device is applicable at Bluetooth
function only.
E-12
7/25/23 1:37 PM
7/25/23 1:37 PM
