Idiomas disponibles
Idiomas disponibles
Warning
• Understand country lighting laws and regulations before use.
• Do not shine directly in the eyes.
• Do not submerge the battery or the whole light into water.
• Do not dismantle the light which will void warranty.
• Do not leave the light on and unattended.
• Keep the light away from fire and combustion materials.
Front
3 high brightness white LED light.
Back
10 high brightness red LED light
How do i adjust the size of my helmet and fits me correctly
The Bicycle-Sports Safety Helmet you have just purchased provides protection, whether on or off the road. To insure
proper use of this helmet, familiarize yourself with its features, fit and care by carefully reading through this manual
before wearing your new helmet.
Protection and ventilation
The outer shell allows the helmet to be rated one of the lightest helmets while providing excellent durability and
integrity. The multiple vents with inner air channels draw the air through the helmet and over the brow for maximum
cooling.
Pad fitting
The helmet must fit properly to be effective. With a proper fit, the helmet will not move back and forth or side to side
while fastened. If the helmet does not fit with installed pads, simply remove them and install a different size pad. To
insure the proper fit, mix and match the pad thickness to best conform to your head shape.
Retention system
This Bicycle-Sports Safety Helmet uses a quick-
release buckle that is simple and can be buckled and
unbuckled without changing the adjustment. The
straps must be snugly and evenly tensioned. Place
the helmet firmly on your head and fasten the buckle.
Notice which strap is loose. Tighten the loose strap
after removing the helmet.
To tighten the chin strap, hold the buckle with one hand.
Then pull the excess strap in through. (See Diagram A).
3D BUTTON Easy to touch and operate
Type C charging port with a Dust plug
Diagram A
Rear strap
Rear
Strap 2
Retainer ring
4
Power button
Front chin strap
Front
Strap 1
