Qilive Q.5117 Manual De Instrucciones página 10

6
EN
Fig. 6
WARNING: Make sure that the dust bin and filters are properly installed in
place before plugging the vacuum cleaner.
5.2.
7
Fig. 7
8
Fig. 8
9
Fig. 9
Adjusting the telescopic tube
The telescopic tube (20) has an inner and outer tube.
■
Slide the Telescopic tube release button (21) in the
direction of the arrow marked on the button and hold
it while you adjust the telescopic tube to the desired
length (Fig. 6).
■
Release the button to lock the tubes into place. Do not
over extend the telescopic tube.
PLUGGING, UNPLUGGING, TURNING ON/OFF
Plugging
Pull the power cord to the desired length (Fig. 7). Stop
■
pulling the cord when you see the yellow mark.
■ Then insert the plug firmly into a power outlet of
matching voltage.
CAUTION: Do not pull the power cord further than
the red mark to avoid damage.
Turning on
■
Press the Power button (13) to turn the vacuum cleaner
on (Fig. 8).
Turning off, unplugging and rewinding the cord
Once finished using the appliance:
1. Press the Power button (13) to turn the vacuum cleaner
off (Fig. 8).
2. Remove the plug from the power outlet.
3. Hold the plug and press the Cord rewind button (14)
with the other hand to rewind the cord automatically
(Fig. 9). Guide the cord with your hand to prevent the
plug and cord to whip when rewinding.
4. To transport the vacuum cleaner, lift the carry handle
(14).
10