Levenhuk Wezzer PLUS LP150 Guia Del Usuario página 14

Alarm setup
• In normal mode, press the SET button to switch to alarm mode.
• In alarm mode, press and hold the SET button for 3 seconds to switch to alarm setup mode.
• To change values, use WIND/+ or BARO/–/
Alarm setting order: Alarm hours > Alarm minutes > Quit alarm setup mode.
• Hold WIND/+ and BARO/–/
• Press SET to confirm and move on to the next setting.
Turning the alarm sound on/off
• In normal mode, press the SET button to switch to alarm mode.
• Use the TEMP/ button to turn the alarm on/off. An active alarm is displayed with the
• Press SET to confirm and exit setup mode.
• To turn off the alarm sound, press any button except
time the next day. If you press the
will flash) and sound again in 5 minutes.
Moon phase
Moon phases are calculated by the weather station according to your time zone, time and date. The table shows phase
symbols for the Northern and Southern hemispheres.
Northern Hemisphere icon
Ice alert
If the temperature received from the remote outdoor sensor is below 1°C (33.8°F), the frost symbol
Indoor comfort index
Dry
(humidity < 40%)
If the temperature is not between 20 and 28°C, the symbol is not displayed.
.
for 2 seconds to quickly scroll through the values.
(Backlight/Snooze) button during the alarm, it will pause (the alarm snooze icon
Moon phase name
New Moon
Waxing Crescent
First quarter
Waxing Gibbous
Full Moon
Waning Gibbous
Last quarter
Waning Crescent
Comfortable
(humidity 40–70%)
(Backlight/Snooze). It will automatically go off at the same
14
icon on the screen.
Southern Hemisphere icon
is displayed.
Humid
(humidity > 70%)