Idiomas disponibles
Idiomas disponibles
36
MAINTENANCE
MAINTENANCE
Care
Care
after
wash
After the cycle is finished,
wipe the door and the
inside of the door seal to remove
any moisture.
Leave the door open to dry the washer
tub interior.
Wipe the body of the washing
machine
with a dry
cloth to remove
any moisture.
'-A WARNING
• Unplug
the washer
before cleaning
to avoid
the risk of electric shock.
Failure to follow
this
warning
can cause serious
injury, fire, electric
shock or death.
Never use harsh chemicals,
abrasive
cleaners,
or solvents
to clean the washer. They will damage
the finish.
• Do not use volatile
substances
(benzene,
paint
thinner,
alcohol,
acetone,
etc.) or detergents
with strong
chemical
components
when
cleaning
the washing
machine.
Doing
so may
cause discoloration
or damage
to the machine,
or it may cause a fire.
\ .................................................................................................................................................................................................
2
Care
in cold
climates
sf_
Follow the instructions
for storing
the washing
machine
if you do not use it for an extended
period
of time in cold climates
below freezing
point.
1
Turn off the faucets
connected
with the water
lines.
2
Unscrew
the
water
lines
from
back
of the
washer.
3 Empty
any water
out of the water
lines.
4
Press _®_.
5 Open the door and add 1 gallon
(3.8 L) of nontoxic
recreational
vehicle
(RV) antifreeze
to the empty
washer
tub. Close the door.
6
Press[
_
}fordrainingandspinning.
L___L___J
7
Press (_11_.
- Drain the water from the washing
machine
for
1 minute.
Not all of the RV antifreeze
will be
expelled.
8
Press [_ to turn off the washing
machine
and pull
out the power
plug.
9
Dry the tub interior
of the washer
tub with
a soft
cloth,
and close the door.
0
/
10
Press down
hard on the disengage
button
and
pull out the detergent
dispenser
drawer.
11
Drain the water
from the detergent
dispenser
drawer
and dry out each compartment.
12 Store the washing
machine
in an upright
position.
r @ NOTE
-,
To remove
the antifreeze
after storing
the
washing
machine,
add detergent
to the
dispenser,
and run one cycle. Do not load any
I
laundry
at this time.
1
Turn off the faucets
connected
with
the water
lines.
2
Pour
hot
water
on
the frozen
faucets
to thaw
the
water
lines
and
remove
them.
3
Immerse
the
water
lines
in hot water
to thaw
them.
4 Connect
the water
lines with the water
inlets of
the washing
machine
and faucets.
- See page 14, Connecting
the water
lines for
details.
5 Turn on the faucets.
/
\
6
Press ,O_.
7
Press _.
8
Press
_11_.
- Verify the water fills properly.
