Hilti SF 6-A22 Manual De Instrucciones página 19

5.11 Drilling 9
CAUTION
Risk of injury. The accessory tool may suddenly stall, causing the power
tool to rotate about its own axis.
▶ Use the power tool with the side handle fitted and always hold it securely
with both hands.
▶ Always grip the side handle at its outermost end.
CAUTION
Risk of injury. Risk of flying fragments.
▶ Wear eye protection.
▶ Set the torque and operating mode selector ring to the "Drilling" symbol
.
5.12 Hammer-action drilling
SF 6H-A22
▶ Set the selector ring to the "Hammer-action drilling" position
5.13 Screwdriving
▶ Set the torque and operating mode selector ring to the required torque.
5.14 Switching on
▶ Press the control switch.
➥ Speed is steplessly adjustable from minimum to maximum.
5.15 Switching off
▶ Release the control switch.
6 Care and maintenance
WARNING
Risk of injury with battery inserted !
▶ Always remove the battery before carrying out care and maintenance
tasks!
Care and maintenance of the tool
• Carefully remove stubborn dirt.
• Clean the air vents carefully with a dry brush.
• Use only a slightly damp cloth to clean the casing. Do not use cleaning
agents containing silicone as these can attack the plastic parts.
Care of the Li­ion batteries
• Keep the battery free from oil and grease.
*2231427*
Printed: 19.08.2019 | Doc-Nr: PUB / 5467429 / 000 / 01
9
9
2231427
.
English 13