Idiomas disponibles
Idiomas disponibles
Switch off the power supply. Remove the 4 screws on the back of the unit. To
remove the grille, push the grille upwards and pull it out in your direction.
Clean the air filter grille with neutral detergent and a brush, then rinse it with clean
water. Finally, replace it on the unit.
Cleaning the water tank
•
First drain the water from the water tank by holding the machine over a
container and pulling out the water tank plug on the back of the machine.
•
Then remove the cover grille and the water filter.
•
Clean the tank with a soft cloth that you have previously dipped in soapy
water.
•
Then rinse the tank with warm and clear water and wipe it again with a
dry cloth.
•
Now insert the water tank plug firmly back into the opening on the
underside.
•
Then allow the tank to dry completely and insert the removed parts in the
reverse direction before filling it again.
Cleaning the housing
Clean the housing with neutral detergent and a soft cloth.
Caution: Switch off the power supply when cleaning the unit as there is high
pressure inside. Do not leave moisture on the surface of the control panel.
Carry out the cleaning and maintenance operations regularly according to these
instructions to ensure optimum performance and service life of the appliance.
Activities at the beginning/end of the season
End of season activities
•
Switch off the unit and disconnect the mains plug.
•
Empty and carefully clean the water tank.
•
Clean the cover grille and replace it after it has dried (see section "Cleaning
and maintenance").
•
Pack the unit and store it in a cool, dry place.
Controls at the beginning of the season
129
