Idiomas disponibles
Idiomas disponibles
•
Place the unit on a level and solid surface so that the unit has a firm footing.
•
The distance to walls or other objects must be at least 50 cm.
•
Before using the unit, make sure that both the air inlet and the air outlet are
free of obstacles and not blocked.
•
Connect the unit to an earthed socket.
•
Mounting the castors: Place the unit on a flat surface, take the spanner out
of the foam box and then mount the castors.
Fill water tank
Open the flap on the back of the fan cooler to fill
the unit with clean water.
Note here:
•
Make sure to keep an eye on the water level
in the container when filling it.
•
The water level in the tank should never exceed the "MAX" mark. When using
the air cooler, the total water level in the tank should never fall below the
"MIN" mark.
If you want to increase the cooling capacity, you can add ice or frozen ice cubes
to the water container. However, note that the total water level in the container
should not exceed the "MAX" mark.
Remote control
Preparing the remote control - Inserting or replacing the battery
Please follow the instructions below:
•
To operate the remote control, please insert the 2 AAA
batteries.
•
Please always pay attention to the polarity markings
(+/-) on the battery and the battery holder:
Then push the battery holder fully back into the remote
control.
Operation
126
