Entering The Password Protected Menu (Password 000) - AERMEC RePuro 100 Manual De Instrucciones

11.7.

ENTERING THE PASSWORD PROTECTED MENU (Password 000)

The RePuro unit has several password protected operator parameters. The password avoids accidental modification of these
parameters which are:
- Operating season (parameter code SEA)
- Heating operating setpoint (parameter code SPH)
- Cooling operating setpoint (parameter code SPC)
- The cleaning time (parameter code CT)
- Bypass freecooling setpoint (parameter code BPF)
The procedures for setting each of these parameters will be explained in the following paragraphs. In order to see or modify these
parameters it is first necessary to enter the password menu.
To enter the password menu it is necessary to follow the procedure detailed in paragraph 11.4, then pressing the MODE/SELECT
key allows the password value to be inserted (this value is 000). A further press of the MODE/SELECT key confirms the value, which
if correctly inserted allows access to the protected parameters.
Password menu:
1
2
The disappearance of the SET icon shows
that the system is awaiting insertion of the
password (default value of 000)
3
Once in the password menu the first op-
erating parameter (SEA) will be displayed.
WARNING: Once in the password protect-
ed menu pressing the navigation keys (
, ) permits moving between the various
parameters. If during the display of the SEA
parameter the ( ) key is pressed this ex-
its the password menu and to return to the
password menu it is necessary to repeat
the procedure detailed in this page.
1
Activate password modifi-
cation mode
Below is the sequence of parameters contained in the
protected password menu:
Main menu
2
Set password value
Password menu:
SEASON parameter:
HEATING SETPOINT parameter:
COOLING SETPOINT parameter
CLEANING TIME parameter:
BY-PASS parameter:
3
Confirm password value
4238010_02 - 1302
33