General Warnings; Conservation Of Documentation; Safety Warnings And Installation Standards; Product Identification - AERMEC RePuro 100 Manual De Instrucciones

RePuro is an innovative counter-
flow heat recovery system which
ensures the correct renewal of air
to indoor environments. Through
the use of up to 90% high effi-
ciency heat exchangers RePuro
allows the introduction of fresh
air at a temperature close to that
of the room concerned, redu-
cing energy costs that would be
incurred in exchanging the air in
traditional ways or by mechanical
ventilation alone.
Versions available:
• standard (with frost protection
for climates > -10°C)
• R (with electric pre-heater for
continuous operation in cold
climates <-10°C; this version is not
available for sizes 100 and 170)
All units are supplied with the ioni-
zer filter PLASMACLUSTER
Plasmacluster is capable of re-
ducing the level of pollutants, by
decomposing the molecules that
form them.
Using a series of electric shocks,
"Plasmacluster" causes the water
molecules present in the air to se-
parate into positive and negative
ions. These ions neutralise the gas
pollutant molecules, forming pro-
ducts that are normally present in
clean air.
The result is in the air: you can
finally breath clean, odour-free
ionised air.
RePuro350R
24
4238010_02 - 1302
7.

GENERAL WARNINGS

The AERMEC RePuro units are manufac-
tured in accordance with recognised
technical standards and safety regula-
tions. They are designed for the renewal
and treatment of ambient air, and they
must be used for the purpose for which
they are intended and their perfor-
mance characteristics. All contractual
and extra-contractual liabilities causing
damage to persons, animals or objects
or through errors of installation, control
or maintenance or from improper use
are excluded by the Company. Any
uses not expressly indicated in this man-
ual are not permitted.
7.1. CONSERVATION OF DOCUMENTA-
TION
Consign the instructions with all the
complementary documentation to the
user of the accessory who will assume
responsibility for the conservation of
the instructions so that these are always
available in case of need.
Carefully read this document. The ex-
ecution of all the works must be car-
ried out by qualified personnel, in ac-
cordance with the national regulations.
(D.M. 329/2004).
It must be installed in such a way to
8.

PRODUCT IDENTIFICATION

The RePuro air heat recovery units are
identified through:
− PACKING LABEL
that records the product identifica-
tion data.
− TECHNICAL LABEL
technical label
make maintenance and/or repair func-
tions possible.
Do not modify or tamper with the ac-
cessory as this may cause danger for
which the manufacturer will not accept
any responsibility for damages caused.
The warranty is voided if the above in-
structions are not followed.
7.2. SAFETY WARNINGS AND INSTALLA-
TION STANDARDS
− The unit must be installed by a
competent and qualified techni-
cian, and in accordance with the
legislation applicable in the coun-
try of installation (D.M. 329/2004).
AERMEC assumes no responsibility for
damage caused by failure to observe
these instructions.
− Before commencing any works it is
necessary to CAREFULLY READ THE
INSTRUCTIONS AND MINIMISE ANY
RISKS BY TAKING APPROPRIATE SAFETY
PRECAUTIONS. All relevant personnel
must be made aware of the proce-
dures and possible risks that may arise
at the time of installation of the unit
WARNING: The tampering, re-
moval or absence of the iden-
tification label renders difficult
any operation of installation or
maintenance.
example of technical label
MODELLO RePuro350R
MODEL
Numero di serie
YYMMLLPPPPPPXXXX
Serial Number
Numero Commessa
000000
Purchase Order
Tensione nominale Frequenza Nominale
230V
Rated Voltage Rated Frequency
Potenza Assorbita Nominale Corrente Assorbita Nominale
180W
Rated Power Input
Rated Current Input
Potenza Assorbita Nominale con resistenza
180W
Rated Power Input with electric heater
Potenza Assorbita Nominale con resistenza
1.6A
Rated Power Input with electric heater
VERSIONE
00
VERSION
Peso
20kg
IPxx
Weight
50Hz
1.6A
0000000_00